yall saw this coming. somehow now all my slices are missing layers? not just the top layer,, all through the model. the pics are a model allen wrench holder. it sits flat and has pegboard hooks on it and it stair steps so you can see the,,,artifacts, missing layer on differant levels, anyway after looking at the b/l forum and reading of cases just like this and op was given laundry list of shit, some good tips some not so much.and no fix. i tried lots of stuff. pretty much everything they said, most likely is with my 4 weeks of printing experiance im messing up some how. the tinfoil hat simian in me has to wonder if this is to force the next update. the one that forces all prints to the cloud and bricks your printer from gun stuff. prob not but im not doing the update. printer is offline and fed by sd card. x1c last print came out ok, not perfect but usable. im hoping one of the 3dp monkeys can go "oh set this dipshit" stuff i have printed ok now looks like this when i open it and it slices.
Speed is likely a little too high, or your print nozzle too far off the previous layer, or a combo of both! Also, check your nozzles temp, not likely an issue, but ya never know! I find these types of issue are generally one of the basics above and not something more involved like the slicer layout or infill, though I would look there next if this continues!
i agree its prob some thing i messed with. on speed i made everything over 100 to 80 and reduced the rest by half. i also tried all of the presets. .08 looks best and .28 worst, .08 still has the layers missing but is better so layer height? i swapped hotends and i dont see signs of a clog. squirts ok. 190 nozzel, bed 40. "print nozzle too far off the previous layer," is this z height? thanks for playing! appreciated. i understand how simple it sounds and how complicated it is.
a visual helps. i feel like im looking at the solution and still dont get it. this is what slicing at .08, .20, and .28 .08 takes 68hr to print but all most looks doable. .20 = 24hr and .28 is 17 , and does not look printable to me,,, really? 68hr print? does anyone do 68hr prints? in all of my 4 weeks printing expereance iv never seen this. 20 is what they say to print this at. all the settings are what is recomended for this model. new fillament coming fri. left is .08 hq center is .20 strength and .28 draft right poll on using a pkm beltfed to fix x1c permanatly?
